The following instructions outline the setup process for L2TP connections on Windows 10

1. Click Win+R on your keyboard, type "control panel" in opened window, and hit enter

2. Click "Network and Internet"

3. Click "Network and Sharing Center"

4. Click "Set up a new connection or network"

5. Select "Connect to a workplace" and click "Next"

6. Select "Use my Internet connection (VPN)"

7. Enter the following and click "Create"

Internet address: Enter the PPTP or L2TP server address of the location/server that you wish to connect to from our server list

Destination name: Enter a name for the connection you are adding, i.e. Anonine

☑ Remember my credentials

8. Go back to Control Panel → Network and Internet → Network and Sharing Center and click "Change adapter settings"

9. Right-click on your VPN connection and select "Properties"

10. Open "Security" tab

1) Enter the following information: 

Type of VPN: Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec)

Data encryption: Require encryption (disconnect if server declines)

Allow these protocols 

☑ Challenge Handshake Authentication Protocol (CHAP)

☑ Microsoft CHAP Version 2(MS-CHAP v2)

2) Click "Advanced settings"

Enter pre shared key: "anonine" and click "OK"

Click "OK" to proceed.

11. Right-click on your VPN connection and select "Connect"

12. In opened window you will see your created connection:

13. Choose the connection, and click "Connect"

14. Enter the following and click "OK"

• Username: Enter your Anonine user name
• Password: Enter your Anonine password

15. First connection usually takes no more than a one minute. 

After connection you should see the VPN connection is successful:

All of your online activities are now 100% secure and anonymous while connected to Anonine. 

If you have any questions, or experience any issues while installing & setting up your Windows device to connect to the Anonine VPN servers, please contact our Support Team anytime.